Skip to content
No-Dig Drain Repair

No-Dig Pipe
Relining In
Greenwich

A cracked or root-damaged drain does not have to mean a trench through the garden. A resin liner is cured inside the existing pipe from an access point you already have, sealing every joint along the run, and the surface above is never touched.

  • Licence 368473C, public liability cover
  • You see the fault on camera first
  • Fixed price before work starts

Why No-Dig Suits The Drains In Greenwich

The failure that brings most people here is not a broken pipe. It is a joint. Older drainage is laid in short lengths, so a single run has a great many joints, and after decades of ground movement and root pressure they open a fraction at a time until something backs up.

A liner seals all of them in one pass, which is why it changes the pattern rather than resetting it. Cutting roots out clears the pipe and leaves the way in exactly as it was, and the interval to the next blockage is set by how fast they grow back.

Cured-in-place pipe liner being installed in an existing drain
Service van parked on a Greenwich street

Fix The Fault On Camera Before You Spend Anything On It

Straight Talk

Repairing the drain without touching the fabric

Homes from Greenwich Road down to the Point still run earthenware sewer lines laid over a century ago, now cracked and prone to root entry.

On a period property the drainage repair is rarely the expensive part. Tessellated verandah tiles, original brick paving, a mature garden or a heritage-listed frontage all cost far more to reinstate than the pipe underneath costs to fix.

That is the argument for trenchless in one sentence. The liner is drawn through an existing opening and cured in place, so the surface above is never disturbed and there is nothing to match, replace or explain to council.

Infiltration on a high water table

Where the water table sits close to the pipe, every open joint is an entry point. The line runs fuller than it should year-round, silt comes in with the water, and the system behaves as though it is undersized when it is simply leaking inward.

Pipes threaded across the peninsula’s sandstone shelves shift at the joints as ground and tree loads change, opening gaps that snag waste.

Sealing the run changes that immediately, and it is one of the clearest before-and-after results relining produces. It is also the case most often missed, because nothing looks broken from the surface.

Fall, bellies and what a liner cannot fix

This is the honest limit of the method. A liner follows the pipe it is cured inside. If the run has sagged into a belly or lost its fall, relining seals it and leaves the shape exactly as it was, so the water still pools where it pooled before.

Stormwater plunges toward Gore Cove and the Lane Cove River, scouring silt and leaves into ageing stormwater lines that block in heavy rain.

On sloping ground that failure mode is common enough to check for specifically. Where the profile is wrong, the correct answer is excavation and re-lay of that section, and we will tell you so even though it is the more expensive quote.

What the camera has to show first

Root intrusion is not automatically a relining job. If the roots are fine and the pipe behind them is sound, a cut and jet with a maintenance interval can be the right call for years.

What moves it to relining is structural: an open joint you can see daylight through, a cracked barrel, or a run that has been cleared repeatedly at shortening intervals. Anyone quoting a liner without showing you the inside of the pipe is guessing, and you should ask for the footage.

Layers of previous work, and what the camera finds

An older house is rarely on one generation of drainage. It is on three or four, joined wherever a bathroom moved or an extension went on, and the transitions between materials are where most faults sit.

A camera run on a property like this is genuinely diagnostic rather than a formality. It is common to find a sound original clay run, a poor 1970s junction, and a modern PVC section all on the same line, each needing a different answer.

Long runs and where the access points sit

Properties on a slope often have long drainage runs, sometimes crossing the whole block to reach the main. The practical questions are where the inspection openings are and whether the liner can be drawn through in one length or needs a second access.

That is worth establishing before quoting. A single long run costs less per metre than the same distance broken into stages, and the difference is decided by access, not by the pipe.

When relining is the wrong answer

It is not a universal fix and anyone presenting it as one is selling rather than advising. A liner follows the shape of the host pipe, so it cannot correct a run that has lost its fall or sagged into a belly. A collapsed section has nothing to line against. A pipe crushed badly out of round has to be replaced.

In those cases the right answer is excavation, and we would rather quote that and be trusted than reline something that will disappoint you in two years.

What it costs in Greenwich

01

Survey first: $300–$750

A recorded camera run with distances marked. Yours to keep, and usually credited if the work goes ahead.

02

Liner, $500–$900 a metre

The prevailing 2026 Sydney range for residential sewer relining.

03

Single defect patch, $1,500–$4,000

Proportionate for one fault in a sound run. We will recommend it over a full liner when that is what the camera shows.

04

Full-length reline, $6,000–$15,000

For a run failing along its length, which on old clay is the common finding.

05

The dig-up alternative, from $2,500 upward

Plus reinstatement. On a bare lawn it can win. Under anything you would miss, it usually does not.

Indicative Sydney ranges for 2026. Your job is quoted in writing after the camera survey. Figures here are indicative of the 2026 Sydney market rather than a quote from us, you get your own number as a fixed price before any work starts.

From Survey To Finished Liner

Step 01
Step 01
CCTV camera being fed into a drain access point

Look Before Quoting

Nothing is priced until a camera has been down the line. The survey is recorded, distances are marked from a known point, and the footage is yours.

Step 02
Plumber explaining the drain fault from camera footage

Decide What It Needs

A single defect in a sound run wants a patch. A run failing along its length wants a full liner. A collapsed or sagging section wants excavation. The camera decides, not the quote.

Step 03
Resin liner curing inside an existing drain

Install The Liner

Jet clean, install through the existing opening, cure in place. Water is off for part of the day and nothing above the pipe is disturbed.

Step 04
Finished pipe reline confirmed on camera

Prove It Is Right

Junctions reinstated, final camera run, and the compliance paperwork where the work is notifiable. You keep both recordings.

Want The Camera Run First?

Leave your details and a licensed plumber will call back to arrange the survey. No quote is given before someone has seen inside the pipe.

Plumber answering a Greenwich enquiry by phone
Service van parked on a Greenwich street

Relining, Answered Properly

The questions that come up before every relining job, answered with real numbers.

Ask us yours
Service van on its way to a Greenwich job
Yes, and no honest quote exists without one. The survey establishes the pipe material and diameter, where the defects sit and how far they are from an access point, whether the fall is intact, and where the junctions are. Ask for the footage afterwards. It is your property, it is the evidence behind the price, and it is what an insurer, a strata manager or a buyer will want to see later.
Relining is priced per metre and the range across Sydney in 2026 is roughly $500 to $900 a metre for a domestic sewer, with junction reinstatement and access usually quoted separately. A short patch repair over a single defect commonly lands between $1,500 and $4,000, and a full-length domestic run more often sits between $6,000 and $15,000. The honest comparison is not liner against nothing: it is liner against excavation plus reinstating whatever sits on top of the pipe.
Most domestic relining is a single day on site: set up at an existing access point, jet and camera the line clean so the liner bonds to pipe rather than debris, install, cure, then reinstate the junctions and camera it again. Water is off for part of the day. Larger or commercial runs are staged, and are often scheduled overnight or across one closed day so the premises can trade.
No, that is the point of the method. The liner is drawn through an existing inspection opening and cured in place, so tessellated verandah tiles, original paving and a mature garden are never disturbed. On a period property the reinstatement is almost always more expensive than the pipe repair underneath it.
Where the water table sits close to the pipe, every open joint is an entry point for groundwater. The line runs fuller than it should year-round and silt comes in with the water, so the system behaves as though it is undersized when it is actually leaking inward. Sealing the run is one of the clearest before-and-after results relining produces.
Only if the cause is a defect rather than the gradient. On a steep run, waste can outrun the water carrying it and settle at the first flat section, producing a blockage at the same point regardless of the household. A liner seals the pipe but keeps its shape, so if the profile is wrong the pooling continues. The camera run distinguishes the two.
Often yes, and that surprises people. A well laid clay line of that age usually still has a sound barrel; what has gone is the mortar or rubber at each joint, and there is one every few hundred millimetres. You are sealing a long series of small openings, not replacing a pipe, and that is exactly what relining is for.

Book A Relining Survey In Greenwich

Phone is quickest. The form reaches the crew covering Greenwich, and the first step is always the survey.

Online now

No obligation · Licensed & insured · Upfront pricing

Licensed Greenwich plumber
Call Now